Diffusion pollution from livestock and poultry rearing in the Yangtze Delta,China

BACKGROUND: The Yangtze Delta is one of the most developed regions in China and includes Shanghai, eight cities in Jiangsu province and eight cities in Zhejiang province. Meat consumption in this region has increased with economic growth, and most of the consumed meat is produced locally. The water quality of surface waters has deteriorated in recent years. An example was the huge blue-green algae bloom in Tai Lake in late May 2007, which affected millions of people's daily drinking water. However, animal husbandry is considered to be one of the main pollution sources. METHODS: Pollutants (NH3-N, total phosphorus (TP), and total nitrogen (TN)) excreted by livestock and poultry, and the resultant COD (chemical oxygen demand) and BOD (biochemical oxygen demand), were estimated using two different methods based on different data sets. RESULTS: The number of livestock and poultry has remained stable in the Yangtze Delta over the four years from 1999 to 2002, with the average number of pigs, cattle, sheep and poultry being 21.1 M, 0.4 M, 7.7 M and 597.6 M, respectively. Pollutants in livestock and poultry excreta estimated by Method I were: 0.12 Mt NH3-N, 0.11 Mt TP and 0.29 Mt TN, resulting in COD and BOD of 1.34 Mt and 1.30 Mt, respectively, while the estimations based on Method II were: 0.18 Mt NH3-N, 0.15 Mt TP and 0.40 Mt TN, resulting in COD and BOD of 1.95 Mt and 1.80 Mt, respectively. DISCUSSION: Pollutants excreted annually by livestock and poultry in the Yangtze Delta are estimated to be: 0.17 Mt NH3-N, 0.16 Mt TP and 0.42 Mt TN, giving rise to a COD of 1.86 Mt and a BOD of 1.72 Mt. Approximately 25% of this pollution was estimated to enter water bodies, which means that the annual pollutant load is 43,700 t NH3-N, 39,400 tTP, 104,600t TN with a COD of 465,000 tand a BOD of 430,100 t. Pollutants from animal husbandry were similar in magnitude to those from industrial wastewater. Pigs produced the most pollution, followed by poultry, cattle and sheep. The pollution load from animal husbandry in the Yangtze Delta is about twice the average level of the whole of China. CONCLUSIONS: Domestic wastewater was the main pollution source in the Yangtze Delta, followed by pollution from raising livestock and poultry and from industrial wastewater. The pollution load in Shanghai and Jiaxing were the greatest, followed by 7 cities of Jiangsu province (except Suzhou) and other cities of Zhejiang province and Suzhou. Pigs and poultry produced about 90% of the total pollutants from animal husbandry. RECOMMENDATIONS AND PERSPECTIVES: The local governments, especially in Shanghai and Jiaxing, should focus their attention on the pollution produced by livestock and poulrry. Controlling pollution from pigs and poultry will have the greatest impact in this region. Control of pollution will be facilitated by the development of large-scale livestock and poultry farming units and a shift away from small scale husbandry.     

湖州市埭溪镇污水处理厂的工程设计

湖州市埭溪镇污水处理厂的设计规模，近期为2万m^2／d，远期为3万m^2／d，其污水处理工艺采用改良式A^2／O工艺，污泥处理工艺采用带式浓缩脱水一体机。文中着重介绍了工程设计参数、处理工艺流程及其设计特点。     

Fate of cancerostatic platinum compounds in biological wastewater treatment of hospital effluents

The present work focuses on the fate of two cancerostatic platinum compounds (CPC), cisplatin and carboplatin, as well as of two inorganic platinum compounds, [PtCl₄]²⁻ and [PtCl₆]²⁻ in biological wastewater treatment. Laboratory experiments modelling adsorption of these compounds onto activated sludge showed promising specific adsorption coefficients K_D and K_OC and Freundlich adsorption isotherms. However, the adsorption properties of the investigated substances were differing significantly. Adsorption decreased following the order cisplatin > [PtCl₆]²⁻ > [PtCl₄]²⁻ > carboplatin. Log K_D-values were ranging from 2.5 to 4.3 , log K_OC from 3.0 to 4.7.

A pilot membrane bioreactor system (MBR) was installed in a hospital in Vienna and fed with wastewater from the oncologic in-patient treatment ward to investigate CPC-adsorption in a sewage treatment plant. During three monitoring periods Pt-concentrations were measured in the influent (3–250 μg l⁻¹ Pt) and the effluent (2–150 μg l⁻¹ Pt) of the treatment plant using ICP-MS. The monitoring periods (duration 30 d) revealed elimination efficiencies between 51% and 63% based on averaged weekly input–output budgets. The derived log K_D-values and log K_OC-values ranged from 2.4 to 4.8 and from 2.8 to 5.3, respectively. Species analysis using HPLC-ICP-MS proofed that mainly carboplatin was present as intact drug in the influent and – due to low log K_D – in the effluent of the MBR.     

生态土壤渗滤系统启动周期研究

利用室内模拟试验装置,考察了4种生态土壤渗滤系统在0.1 m3/(m2·d)的水力负荷条件下对生活污水中TP、COD和NH3-N的去除效果及启动周期; 同时对整个系统及同类生态工艺启动周期的判断方法做了探讨.研究结果表明,生态土壤渗滤系统对TP、COD和NH3-N的启动周期分别为15～27 d、24～40 d和24～26 d; 土壤渗滤系统对TP的启动周期最短,对COD的启动周期最长; 处理系统启动周期的判断原则是综合考察系统对主要污染物各自的启动周期,以最长的作为系统启动周期.4组试验中,1#和2#系统的启动周期为40 d; 3#和4#的为24 d.     

GHS化学品危险性分类及其公示要素(上)

概述了全球化学品统一分类和标签制度（GHS）的产生背景、推行GHS的重要意义，介绍了GHS关于化学品危险性分类和公示要素的主要内容，评估了我国现行化学品危险性分类与GHS分类的差异点，并对我国全面实施GHS提出了若干对策建议。     

用海泡石处理采油废水

用海泡石吸附法处理采油废水，考察了处理时间、海泡石加入量和采油废水pH对采油废水COD去除率的影响，并通过正交实验优化了采油废水处理工艺条件。通过正交实验得到的采油废水处理最佳工艺条件为：处理时间6h，粒径为150μm的海泡石加入量200g／L，采油废水pH9。在该条件下处理采油废水，COD去除率达到91％，处理后出水的COD为34．71mg／L，小于GB8978-1996（（污水综合排放标准》中的一级标准（60mg／L）。     

硫化亚铁处理含砷废水中砷的形态变化

本文对用硫化亚铁处理含砷废水时，在气相、液相和固相中砷的形态进行了研究结果表明，在气相中无ＡａＨ３，但在Ａｓ（Ｖ）废水的液相中有Ａｓ（Ｖ）和Ａｓ（Ⅲ）共同存在，在固相中有Ａｓ（０），ＦｅＡｓＯ４（ＦｅＡｓＯ３），Ａｓ２Ｓ３（Ａｓ２Ｓ５）和吸附砷，砷的形态变化表明，硫化亚铁处理含砷废水能取得良好的效果，是沉淀、沉淀转化、氧化还原、吸附共沉淀和中和五种反应共同作用的结果。     

铁铜双金属有机骨架MIL-101(Fe,Cu)活化双氧水降解染料性能

针对非均相芬顿传质效率低和Fe（Ⅲ）Fe（Ⅱ）转化慢导致活性低等问题,采用溶剂热法制备铁铜双金属有机骨架材料[MIL-101（Fe,Cu）],并研究了材料界面性质、催化降解染料（亚甲基蓝）性能以及活化催化机制.结果表明,MIL-101（Fe,Cu）晶体结构完整且呈三维八面体形状;比表面积和平均孔径分别为667.2 m² ·g^-1和1.9 nm,可充分暴露反应活性位点.MIL-101（Fe,Cu）在广谱pH范围可活化H₂ O₂高效降解亚甲基蓝.当pH=5、反应20 min,MIL-101（Fe,Cu）/H₂ O₂对20 mg ·L^-1亚甲基蓝的去除率为100%,较MIL-101（Fe）/H₂O₂和单独H₂ O₂分别提高43.1%和88.9%.自由基猝灭实验与反应前后铁和铜价态变化结果表明,羟基自由基（·OH）是MIL-101（Fe,Cu）/H₂ O₂催化降解亚甲基蓝的主要活性物种;Cu（Ⅱ）掺杂引入新的活性位点,且Cu（Ⅱ）/Cu（Ⅰ）循环和Fe（Ⅲ）/Fe（Ⅱ）循环可协同产生·OH,进而提高催化效率.MIL-101（Fe,Cu）作为新型非均相类芬顿催化剂,无需复杂pH调节即可获得良好催化效果,在工业废水处理上具有较好地应用前景.     

MnO2/Al2O3催化剂-微气泡臭氧体系催化降解喹啉及其机理

制备了纳米MnO₂,并以Al₂O₃为载体制备了掺杂型MnO₂/Al₂O₃颗粒催化剂.催化剂焙烧温度和时间分别为500℃和4 h、MnO₂质量分数为8%时,催化剂具有最高的臭氧催化氧化活性.SEM分析表明,纳米MnO₂均匀分布于Al₂O₃载体表面.MnO₂/Al₂O₃催化剂的比表面积（BET）为183.22 m²·g^-1,平均孔容为0.27 cm³·g^-1,平均孔径为4.87 nm.建立了MnO₂/Al₂O₃催化剂-微气泡臭氧催化反应体系,研究了该体系对喹啉的降解去除效果及其机理.臭氧微气泡的平均粒径为61.7 μm.微气泡臭氧投量为30 mg·L^-1时,反应60 min后喹啉去除率能达到95%以上;反应20 min后,MnO₂/Al₂O₃催化剂-微气泡臭氧体系对实际煤化工废水二级出水的TOC去除率可达到55%以上.以叔丁醇作为分子探针,证明了羟基自由基（·OH）氧化作用在臭氧微气泡催化氧化体系中对喹啉的降解起到主导作用.     

亚氧化钛膜电极电化学特性及其处理印染工业废水的效能研究

电化学氧化法具有稳定高效、操作灵活、集成度高等特点,在处理难降解有机废水领域具有独特优势.电化学废水处理过程通常受限于传质速率,而膜电极有望解决这一瓶颈问题.亚氧化钛膜电极（TiSO-ME）的化学结构与电化学性质结果显示,经过高温还原法制备的TiSO-ME电极主要由Ti₄O₇和少量Ti₅O₉组成,大孔体积占总孔体积的92.7%,平均孔径为0.508 μm.电化学测试结果表明,TiSO-ME具有良好的导电性、高析氧电位和电化学稳定性.过滤试验结果表明,在0.82×10^-3~3.14×10^-3 mL·cm^-2·s^-1范围内膜通量与传质系数成正比.在电流密度为8 mA·cm^-2,膜通量为2.31×10^-3 mL·cm^-2·s^-1的条件下,电解1.5 h即可有效处理实际印染工业废水,sCOD去除率高达96.07%,电流效率可达24.22%,电能消耗较不存在膜通量时降低了32.99%.TiSO-ME能够实现废水在膜孔结构内部的穿流式操作,有效克服旁流式操作传质受限的问题,在小规模分散式工业废水处理中有着重要的研究价值和发展潜力.